Publikace

Úplný seznam včetně české publikační činnosti, patentů, funkčních vzorků a software vede V3S ČVUT — 144 publikací, průběžně doplňovaný do roku 2026. ORCID obsahuje výběr 75 záznamů zaměřený na mezinárodní výstupy; nezahrnuje skripta ani českou periodickou tvorbu. Oba seznamy jsou platné, jen mají jiný záběr.

Scopus uvádí 77 dokumentů, V3S ČVUT 144 publikací. Rozdíl není chyba: Scopus neindexuje česká odborná periodika ani lokální sborníky, ve kterých část mé práce vyšla.

Nejcitovanější a nejnovější výstupy. Počty citací jsou ze Scopusu. k datu 2026-09-15.

Články v recenzovaných časopisech

  1. 2025 Novák, M. Bezkontaktní systém měření úhlu náběhu dvojkolí. Současné problémy v kolejových vozidlech. DOI 10.46585/spkv20252660
  2. 2022 Novák, Z.; Novák, M. Adaptive PLL-Based Sensorless Control for Improved Dynamics of High-Speed PMSM. IEEE Transactions on Power Electronics, 37(9), 10154–10165. DOI 10.1109/TPEL.2022.3169708 · 127 citací
  3. 2021 Dunai, L.; Novák, M.; García Espert, C. Human Hand Anatomy-Based Prosthetic Hand. Sensors, 21(137), 1–15. DOI 10.3390/s21010137 · 60 citací
  4. 2020 Novák, M.; Novák, J.; Morkus, J.; Musálek, L.; Sivkov, O. Drivetrain modelling and parameter calculation for an electric bus with fixed or 2-speed gearbox. International Journal of Electric and Hybrid Vehicles, 12(3), 229–252. DOI 10.1504/IJEHV.2020.110088
  5. 2020 Novák, M.; Chyský, J.; Novák, L. Data from long time testing of 18650 lithium polymer batteries. Data in Brief, 29, 1–7. DOI 10.1016/j.dib.2020.105137
  6. 2018 Flah, A.; Novák, M.; Sbita, L. An improved reactive power MRAS speed estimator with optimization for a hybrid electric vehicles application. Journal of Dynamic Systems, Measurement and Control (ASME), 140(6). DOI 10.1115/1.4039212 · 20 citací
  7. 2017 Gregor, A.; Filová, E.; Novák, M.; Kronek, J.; Chlup, H.; Buzgo, M.; Blahnová, V.; Lukášová, V. et al. Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer. Journal of Biological Engineering, 11. DOI 10.1186/s13036-017-0074-3 · 409 citací
  8. 2014 Novák, M.; Flah, A.; Novák, J.; Sbita, L. Online High-Speed PMSM Parameters Estimation and Stability Analysis. Acta Polytechnica Hungarica, 11(9), 75–94. ISSN 1785-8860
  9. 2014 Flah, A.; Novák, M.; Sbita, L.; Novák, J. Estimation of motor parameters for an electrical vehicle application. International Journal of Modelling, Identification and Control, 22(2), 150–158. DOI 10.1504/IJMIC.2014.064290

Kniha

  1. 2020 Novák, M. Introduction to Sensors for Electrical and Mechanical Engineers. CRC Press, Taylor & Francis Group, Boca Raton, 1st edition. ISBN 9780367518219

Kapitola v knize

  1. 2011 Novák, M.; Novák, J.; Stanke, O.; Chyský, J. Microturbine Power Generator. Lecture Notes in Electrical Engineering – Electrical Engineering and Control, vol. 2, Springer, 757–764. DOI 10.1007/978-3-642-21765-4_94

Konferenční příspěvky

  1. 2026 Badour, S.; Novák, M.; Novák, Z.; Novák, J. Three Level GaN Inverter for a Residential Heat-Pump. 18th International Conference on Electronics, Computers and Artificial Intelligence (ECAI 2026), IEEE. ISBN 979-8-3315-5818-5
  2. 2026 Badour, S.; Novák, M.; Novák, Z.; Novák, J. Tuning of LCL filter parameters for pulse rectifier. 18th International Conference on Electronics, Computers and Artificial Intelligence (ECAI 2026), IEEE. ISBN 979-8-3315-5818-5
  3. 2026 Badour, S.; Novák, M. Calibrated Multi-Sensor Models for Early Defect Forecasting in Extrusion 3D Printing. 18th International Conference on Electronics, Computers and Artificial Intelligence (ECAI 2026), IEEE. ISBN 979-8-3315-5818-5
  4. 2025 Novák, M. Design of an SiC Inverter for a Residential Heat-Pump. 13th International Conference on Control, Mechatronics and Automation (ICCMA 2025), Paris, 248–253. ISBN 979-8-3315-9140-3
  5. 2025 Novák, M.; Koucký, V.; Valenta, P. Simulation and Experimental Validation of Dual Active Bridge DC/DC Converter for Energy Storage in LiFePO Cells. 13th International Conference on Control, Mechatronics and Automation (ICCMA 2025), Paris, 237–242. ISBN 979-8-3315-9140-3
  6. 2025 Novák, M.; Koucký, V.; Valenta, P. Experimental GaN based Triple Active Bridge converter. 13th International Conference on Control, Mechatronics and Automation (ICCMA 2025), Paris, 258–263. ISBN 979-8-3315-9140-3
  7. 2023 Novák, M. et al. Dynamic Drive Cycle Model of a Fuel-Cell Powered Hybrid Bus. IEEE International Symposium on Industrial Electronics (ISIE 2023). DOI 10.1109/ISIE51358.2023.10228004
  8. 2023 Novák, M. et al. Modeling and Experimental Validation of a LTO Battery Cell for a Hydrogen Hybrid Bus. IEEE International Symposium on Industrial Electronics (ISIE 2023). DOI 10.1109/ISIE51358.2023.10227943
  9. 2022 Novák, M. et al. Drive Cycle Modeling of a Hybrid Bus with Fuel Cell. IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society. DOI 10.1109/IECON49645.2022.9968796
  10. 2022 Novák, M. Simulation and Design of Control Systems: A Rapid Software Prototyping Class for Mechanical Engineering Students. 9th IEEE International Conference on e-Learning in Industrial Electronics (ICELIE 2022). DOI 10.1109/ICELIE55228.2022.9969421
  11. 2021 Novák, M. et al. Loss Minimization Control and Energy Consumption Improvements in PMSM drive. International Conference on Electrical Drives and Power Electronics (EDPE 2021). DOI 10.1109/EDPE53134.2021.9604085
  12. 2021 Novák, M. et al. Laser Distance Meter and LIDAR Demonstrator Module for Teaching of Sensors. IEEE International Conference on Industrial Technology (ICIT 2021). DOI 10.1109/ICIT46573.2021.9453501
  13. 2020 Dunai, L.; Novák, M.; García Espert, C. Development of a prosthetic hand based on human hand anatomy. IECON 2020 – 46th Annual Conference of the IEEE Industrial Electronics Society. DOI 10.1109/IECON43393.2020.9254216 · 11 citací
  14. 2020 Novák, M. et al. Methodology for Calculation of Efficiency Maps for Permanent Magnet Synchronous Motors from Sparse Measured Data. 19th International Conference on Mechatronics – Mechatronika (ME 2020). DOI 10.1109/ME49197.2020.9286616
  15. 2018 Novák, M. et al. Comparison between Si IGBT and SiC MOSFET Inverters for AC Motor Drive. 18th International Conference on Mechatronics – Mechatronika (ME 2018). 18 citací
  16. 2017 Novák, M. et al. Efficiency mapping of a 100 kW PMSM for traction applications. IEEE International Symposium on Industrial Electronics (ISIE 2017). DOI 10.1109/ISIE.2017.8001262 · 10 citací
  17. 2015 Novák, M.; Novák, J.; Sivkov, O. An SiC inverter for high speed permanent magnet synchronous machines. IECON 2015 – 41st Annual Conference of the IEEE Industrial Electronics Society. DOI 10.1109/IECON.2015.7392461 · 9 citací
  18. 2013 Novák, M.; Novák, J. Stability issues of high-speed PMSM feedback control systems. 15th European Conference on Power Electronics and Applications (EPE 2013). DOI 10.1109/EPE.2013.6634466 · 9 citací
  19. 2009 Novák, M.; Novák, J. Electrically-driven compressors on turbocharged engines with high-speed synchronous motors. 8th International Symposium on Advanced Electromechanical Motion Systems (ELECTROMOTION 2009). DOI 10.1109/ELECTROMOTION.2009.5259122 · 14 citací
  20. 2008 Novák, M.; Novák, J. Digital controlled high speed synchronous motor. 13th International Power Electronics and Motion Control Conference (EPE-PEMC 2008). DOI 10.1109/EPEPEMC.2008.4635395 · 11 citací

Skripta a učební texty

  1. 2018 Novák, M. Technická měření. Česká technika – nakladatelství ČVUT, Praha. ISBN 978-80-01-06388-0
  2. 2017 Novák, M. Collection of examples from electronics, electrical machines and drives. Czech Technical University Publishing House, Praha. ISBN 978-80-01-06096-4
  3. 2017 Novák, M.; Chyský, J.; Uhlíř, I.; Novák, L. Sbírka příkladů z elektrotechniky, elektroniky a elektrických strojů a pohonů. Czech Technical University Publishing House, Praha, 2. vydání. ISBN 978-80-01-06097-1

← Zpět na úvodní stránku